Page 14 of 35
Rev. 1.03
ü
Visual inspection of the control devices and signaller, a possible rise in humidity or any
other type of decay.
ü
Check there are not structural changes that can cause the malfunctioning of the
detectors, manual buttons or sirens. In this case carry out a visual inspection, too.
Any problem must be noted in the event register, solving the probable problems as soon as
possible.
3.6.5 Yearly control
The maintenance staff must have the duty to perform the following controls:
ü
Carry out the control procedures advised daily, monthly and four-monthly.
ü
Test the control panel and check all the detectors work as recommended by the
manufacturer (check the parameters).
ü
Look over visually all the connections to the devices and relative supports are safe, they
are not damaged and are protected properly.
ü
Examine and check all the batteries.
Any fault must be noted in the event register, solving the problems as soon as possible.
