73
7.1.2
Putting the equipment into Shipping Mode
Before long term storage, moving an installed unit, or shipping for repair, the Sentinel2
unit should be put into “Shipping mode”.
Be sure to upload any unsent data before this
operation.
To put the Sentinel2 into shipping mode:
•
Read the current configuration of the Sentinel2 using IDT.
•
From within the “PRV Installation” tab, click o
n
the “No Control” button.
Wait until the button has turned pink.
From within the “Setup” tab, scroll to the end of the
settings panels and click on the “Stop Device” button.
•
Click “Yes” when warned that calls will be stopped.
