INSTALLATION & OPERATION MANUAL
MULTI-FLAVOR MERCHANDISERS
5
3.3 Installation of 771/772 Side-Opening Multi-Flavor Merchandiser
1
Remove the merchandiser from the packaging and inspect it for damage or missing parts.
2
Add the snap ring (1) to the bracket (2).
3
Install the hinge brackets on the front of the dispenser.
Ensure the snap ring faces toward the outside of the
dispenser.
1
2
4
Use a 3/32" hex wrench to loosen and remove the collar from the hinge bracket located on the back of the
door. Repeat on lower bracket. Place collars nearby so they are accessible to add back to the brackets once
merchandiser is connected to dispenser.
COLLAR
5
Align the door hinge bracket pins to the holes on the dispenser's hinge bracket. Place the collar back on the
hinge pin and tighten the set screw with a hex wrench.
6
Connect the power and serial communication harnesses to their respective mate from the dispenser (black
connector with black connector, white connector with white connector) and close the merchandiser until it
snaps into place.
DOOR
LOCK
