INSTALLATION & OPERATION MANUAL
MULTI-FLAVOR MERCHANDISERS
32
6.2 Accessing USB Ports and USB Content
Once images have been added to the USB as specified in Section 6.1, the images will need to be uploaded to the
merchandiser. Follow the steps below for accessing the USB ports and uploading the images.
372 Multi-Flavor Merchandiser
1
Lift the door up to view the back panel and locate the opening at the bottom right corner of the door.
2
Insert a USB into any of the available USB ports. Ensure
it is inserted correctly.
3
Push the door back down to close and make sure the door clicks into place.
4
A prompt to load the images onto the merchandiser will
appear on the screen. Select the green check mark to
load the graphics.
If the red X is selected, the process will be canceled.
However, the images can always be uploaded through
the "System Administration" menu, under the Graphics
category by selecting the "Add Graphics" option
(Section 5.10).
5
Once loaded, content can be access through the
"Change Graphics" option (Section 5.2).
