FBD 372 Installation & Operation Manual Download Page 20

Page: 20 / 38

INSTALLATION & OPERATION MANUAL

MULTI-FLAVOR MERCHANDISERS

To change the language, select the "English" button to display a drop-down menu of all supported languages. Once the

language is selected, all menu options and main screen messages (flavor and barrel status) will change to the selected

language.

To change the text color of the flavor messages (the message that appears as an overlay on the flavor button in the

main screen) select the round button to the right of the "Selected Text Color" option. A color selection pop-up window

will appear; once a color is selected, press the green check mark to confirm the selection. The round button on the

"Selected Text Color" option will change to the selected color.

To change the text color of the barrel status messages on the main screen, select the round button to the right of the

"Message Text Color" option. A color selection pop-up window will appear; once a color is selected, press the green

check mark to confirm the selection. The round button on the "Message Text Color" option will change to the selected

color.

Summary of Contents for 372







































Search results

Summary of Contents for 372

Reviews:

Related manuals for 372

Brands by name

Popular brands

FBD 372, Installation & Operation Manual

Search results

Summary of Contents for 372

Reviews:

Related manuals for 372

Brands by name

Popular brands