FBD 372 Installation & Operation Manual Download Page 23

Page: 23 / 38

INSTALLATION & OPERATION MANUAL

MULTI-FLAVOR MERCHANDISERS

Dispense Settings Continued

Item Description

Pre-Injection Delay Time: Sets the time delay before flavor shots are dispensed into the product. Select the

button next to the option and a pop-up window will display a slider bar that allows you to set the time between 0

to 15 seconds. Once a number has been selected, press the green check mark to confirm the selection.

Flavor Time: Sets the time that flavor shots are dispensed into the product. Select the button next to the option

and a pop-up window will display a slider bar that allows you to set the time between 1 to 15 seconds. Once a

number has been selected, press the green check mark to confirm the selection. Please note that this option

only sets the number of seconds the flavor shots are dispensed into the product. To set the rate at which they

are dispensed (oz/sec) each flavor must be calibrated as shown in Section 5.7.

Summary of Contents for 372







































Search results

Summary of Contents for 372

Reviews:

Related manuals for 372

Brands by name

Popular brands

FBD 372, Installation & Operation Manual

Search results

Summary of Contents for 372

Reviews:

Related manuals for 372

Brands by name

Popular brands