FAZUA RIDE 50 STREET Original Instructions Manual Download

Page: 63 / 68

Original instructions | English

TECHNICAL DATA ON THE CHARGER

Charging current

→

2 A

Charging time, approx.

→

3.5 h

Protection class

→

2 [Symbol: ]

Protection type

→

IP54

Weight, approx.

→

0.39 kg

Operating temperature

→

0°C to +45°C

Storage temperature

→

0°C to +45°C

30 USING THE CHARGER

WARNING

Risk of electric shock and fire!

If you use a damaged CHARGER, you could expose yourself and others

to the risk of an electric shock. If you use the CHARGER improperly or

with an incompatible BATTERY, you could cause a fire.

►

Therefore, check all individual part for damage before using the

CHARGER.

►

Never use a damaged CHARGER.

►

Only use the CHARGER in dry indoor areas.

►

Keep water or any liquids away from the CHARGER or all individual

parts of the CHARGER.

►

Since the CHARGER and BATTERY heat up during charging, keep

away from combustible materials and do not leave the two compo-

nents unattended during charging.

►

During charging, place the CHARGER and BATTERY on a well-venti-

lated surface.

►

Only use the CHARGER to charge the original and compatible evation

BATTERY from FAZUA.

►

Never attempt to charge non-rechargeable batteries!

Summary of Contents for RIDE 50 STREET




































































Search results

Summary of Contents for RIDE 50 STREET

Reviews:

Related manuals for RIDE 50 STREET

Brands by name

Popular brands

FAZUA RIDE 50 STREET, Original Instructions Manual

Search results

Summary of Contents for RIDE 50 STREET

Reviews:

Related manuals for RIDE 50 STREET

Brands by name

Popular brands