Original instructions | English
31
►
Never clean the components of the drive system with a hard water
jet or a high-pressure cleaner.
→
Always keep all components of the e-bike and drive system in a clean condition.
→
Clean the components gently with a cloth or soft brush.
→
After cleaning, wipe all surfaces and components to dry them.
→
Pay particular attention to the contacts and interfaces between the BATTERY
and the DRIVEPACK and between the DRIVEPACK and the BOTTOM BRACKET: The
interfaces must not be soiled or contaminated and must be completely dry
before inserting the components to avoid damage.
→
Clean the radiator of the DRIVEPACK regularly.
Do not clean the radiator until it is visibly or heavily soiled!
→
Keep the drainage opening on the radiator clean and clear to ensure that splash
water and/or condensation can drain off the DRIVEPACK without any problems.
To clean the drainage opening, first remove the
BATTERY from the DRIVEPACK (see the figure
with the arrow on the right). Then press out the
dirt, e.g. with a plastic plunger, from the inside
of the DRIVEPACK towards the outside.
IMPORTANT:
Always clean the drainage hole dry;
keep moisture away from the interface for the
BATTERY inside the DRIVEPACK and be careful
not to damage the interface. Also make sure
that the USB socket on the DRIVEPACK is closed
with the cover during cleaning to prevent dirt
from getting into the USB socket or the elec-
tronics of the DRIVEPACK and damaging them.
→
Lubricate the locker for locking the DRIVEPACK
to the frame about every 2 – 3 months or at
the latest as soon as it can no longer be easily
operated.
→
If you have any questions about cleaning and maintenance of your drive
system, please contact a FAZUA certified partner or visit the official FAZUA
service platform (https://fazua.com/de/support).
A
