Original instructions | English
49
If a “Soft Fault” occurs, you will be able to continue riding your e-bike, but
FAZUA strongly recommends not doing so to avoid further faults or damage to
the drive system or to the e-bike.
•
Flashing red = “Hard Fault”
When a “Hard Fault” occurs, the status display flashes red. If a “Hard Fault”
occurs on your e-bike, the e-bike can no longer be used and requires mainte-
nance.
23.2 Display of the charge level/support level
The display
[C.5]
for the charge level or the support level shows two parameters.
•
The display for the charge level of the BATTERY:
The charge level of the BATTERY can be read off via the number of lit LEDs. Each
of the 5 LEDs here represents 20 % of the total charging capacity.
When the BATTERY is fully charged, all 5 LEDs light up. If the BATTERY is flat, the
upper LED of the status indicator lights up white or no LED lights up.
•
The selected pedal support level:
Each support level is assigned a colour, i.e. You can read off the support level
currently set via the colour of the lit LEDs on the display.
More detailed information can be found
→
in chapter 24.3 “Support levels”.
24 USING THE REMOTE
WARNING
Danger due to distraction during operation!
If you are distracted when using the REMOTE while riding, accidents
and serious injuries can result.
►
Keep away from road traffic and familiarise yourself with the functions
and usage of your REMOTE before using your e-bike for the first time.
►
Do not use the REMOTE whilst riding if you are distracted by it.
24.1 Switching the drive system on and off
→
Switch on the drive system using REMOTE by pressing the centre button
[C.2]
.
The LEDs of the display
[C.5]
first signal with a short start animation that you
have switched on the drive system.
Then the display
[C.5]
changes to the regular mode. The LEDs of the display now
light up permanently and indicate the support level and battery charge level.
