FAZUA RIDE 50 STREET Original Instructions Manual Download Page 50

Page: 50 / 68

English | Original instructions

→

Switch off the drive system using the REMOTE by holding down the centre

button for 1 second

[C.2]

C.2

REMOTE RX

REMOTE BX

C.2

REMOTE FX

C.2

24.2 Setting the pedal support

The REMOTE can be used at any time to set the desired support level, including

when riding.

→

Tap the top contact sensor

[C.1]

on the REMOTE to change to the next higher

support level.

REMOTE RX

C.1

REMOTE BX

C.1

REMOTE FX

C.1

→

Tap the bottom contact sensor

[C.3]

on the REMOTE to change to the next lower

support level.

REMOTE RX

C.3

REMOTE FX

C.3

REMOTE BX

C.3

If you are riding in rain mode, set the desired support level using

the centre button

[C.2]

More detailed information can be found

→

in chapter 24.5 “Rain mode”.

Summary of Contents for RIDE 50 STREET




































































Search results

Summary of Contents for RIDE 50 STREET

Reviews:

Related manuals for RIDE 50 STREET

Brands by name

Popular brands

FAZUA RIDE 50 STREET, Original Instructions Manual

Search results

Summary of Contents for RIDE 50 STREET

Reviews:

Related manuals for RIDE 50 STREET

Brands by name

Popular brands