Original instructions | English
53
24.5 Rain mode
Rain mode prevents rain drops from accidentally adjusting the support level of
your e-bike.
If you have activated the rain mode, use the centre button to set the desired
support level:
1. Activate the rain mode by
pressing and holding
the centre button
[C.2]
of
the REMOTE
until the
LED display
[C.5]
on the REMOTE shows a
short blue LED
animation
instead of the current charge level of the BATTERY (in the colour of
the set support level).
The short blue LED animation indicates that you have successfully activated
the rain mode.
Then the LED display
[C.5]
changes again and shows the current charge level
of the battery in the colour of the set support level.
2. In rain mode, press the centre button 1× briefly to switch to the next higher
support level.
By briefly pressing the centre button again, you can switch to the next higher
support level in the following order:
No support
→
“Breeze”
→
“River”
→
“Rocket”
→
No support etc.
3. You switch from rain mode back to regular operating mode by
pressing and
holding
the centre button
until the
LED display
[C.5]
on the REMOTE shows a
short yellow LED animation
instead of the current charge level of the BATTERY
(in the colour of the set support level).
The short yellow LED animation signals that you have successfully deactivated
the rain mode and switched back to the regular operating mode.
Then the LED display
[C.5]
changes again and shows the current charge level
of the battery in the colour of the set support level.