English | Original instructions
24
4.4 Switching on the drive system following a standstill
Your e-bike will be at a standstill as soon as it is switched off.
The drive system (not the BATTERY!) switches off automatically after 15 minutes
of standstill.
→
Briefly press the centre button on the REMOTE 1× to switch on the drive system
again.
The BATTERY switches off automatically after 8 hours of standstill or after 3 hours
of standstill if the charge level of the BATTERY is below 30% (provided no button/
touch sensor is pressed during this time).
→
To switch the BATTERY back on (“wake up”), press:
1× briefly on the centre button on the REMOTE.
or
1× on the on/off button on the BATTERY.
→
After waking up the BATTERY (again), briefly press the centre button on the
REMOTE 1× to switch on the drive system again.
4.5 Setting the support level
More detailed information can be found
→
in chapter 24.2 “Setting the pedal support” and in
chapter 24.3 “Support levels”.
The REMOTE can be used at any time to set the desired support level, including
when riding.
→
Press the top touch sensor of the REMOTE to switch to the next higher support
level.
→
Press the bottom touch sensor on the REMOTE to switch to the next lower
support level.
“SUPPORT LEVELS” OVERVIEW TABLE
Support level
Colour
Max. motor power
None
white
No support
Breeze
green
Configurable up to max. 300 W
River
blue
Configurable up to max. 300 W
Rocket
pink
Configurable up to max. 300 W
