manualshive.com logo in svg

Fayat BOMAG BW 124 PDH-5, Operating Instruction, Maintenance Instruction

Share
Download
Fayat BOMAG BW 124 PDH-5 Operating Instruction, Maintenance Instruction Download Page 183

8.11.3  Replacing the oil separator element

Protective equip-

ment:

n

Working clothes

n

Protective gloves

1.

Park the machine in secured condition

Ä

 Chapter 6.6 „Parking the machine in

secured condition“ on page 106

.

2.

Allow the engine to cool down.

3.

Unscrew the cover (1).

4.

Renew oil separator element (3) and seal

ring (2).

5.

Re-assemble the oil separator.

6.

Dispose of the oil separator element envi-

ronmentally.

8.11.4  Checking the exhaust gas recirculation cooler

This work must only be performed by

authorized service personnel.

8.11.5  Replacing hoses

This work must only be performed by

authorized service personnel.

Perform this maintenance work at

the latest after two years.

The following hoses need to be renewed:

n

fuel hoses,

n

air intake hoses,

n

hoses in connection with the oil separator.

Fig.  164

Maintenance – Every 2000 operating hours

 

BW 124 PDH-5

 

183

Summary of Contents for BOMAG BW 124 PDH-5



















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands