Part No. SCAZ042891 1.3.4
33
E&OE
Operating Instructions Scarab M6
Removing & cleaning the water pump element(s)
Both the low-pressure and, if fitted, the, high-pressure water pump are
fitted with strainers to ensure that foreign matter does not enter the pump.
The following steps detail the recommended cleaning procedure.
It will be necessary to place the shut-off valve(s) in the closed position.
1. Unscrew the filter bowl (
1
) clockwise from the housing (
2
) and
remove the element (
3
).
2. Wash out the element with clean water or replace if too
contaminated.
3. Before re-assembling the unit, apply some grease to the O-seal (
4
) to
ensure a water-tight fit for the filter bowl.
4. Refit the element and filter bowl.
Return the shut-of valve(s) to the ON position.
1
2
3
4
ELECTRIC DRIVEN PUMP
HIGH PRESSURE PUMP
