Part No. SCAZ042891 1.3.4
29
E&OE
Operating Instructions Scarab M6
Auxiliary engine
The auxiliary engine is the responsibility of the operator, as is the chassis engine. The following instructions should be followed as detailed in the
maintenance schedule on Page 27 and in the manufacturer’s recommendations.
Raise the hopper in accordance with the instructions detailed on Page 19.
The hopper prop must always be in the deployed position when working beneath a raise hopper. Failure to do so could result in serious injury.
When mounting the chassis always use the access steps and tread plates. Ensure they are free from contamination that may cause them to
become slippery. Always wear suitable footwear with clean and dry soles.
Ensure that the Machine is on a flat and level surface with the auxiliary engine stopped for a suitable period, to allow the oil to return to the
sump.
Engine oil level
1. Remove the dipstick (1) from the holder.
2. Wipe clean with a lint-free cloth.
3. Replace in it holder. Remove again and check the oil level.
The oil should never fall below the minimum level or exceed the maximum level
shown on the dipstick.
4. Remove the filler cap (2) and pour oil through the opening until the correct level
is maintained.
Engine oil: (15w/40).
5. Replace filler cap.
Allow time for the added oil to drain through to the sump before re-checking the level.
1
2
DIPSTICK LEVELS
