FAURA NFC260 AQUA, Owner'S Manual

Page: 115 / 134

8
White surface
Clasp
Orange surface
Handle
put into operation in:
The suggested operation time is 2 years
Blue surface
● NFC260 AQUA
● GCF220BKNA
3.Installation for Filter of Dust
Collector subassembly
1.Press clasps with hands and remove front
panel.
1).
Take out the strainer sub-assy from carbon
box, tear up the sealing tape and write down
the initial operation date on the label.
2).When the blue flter sponge on the strainer
sub-assy is dirty, take a new blue flter sponge
from white box to replace it.
3).Assemble flter into dust collector subassembly.
1).Take out the flter sponge and the install it into
the dust collector..
4.After assembling dust collector, assemble
front panel. Please note that hangers on
the unit shall be assembled firstly and the
position is shown in the below picture.
2.Draw handles of dust collector subassembly
outwards to remove dust collector.
3.Each model has slightly different flter and
fltering sponge. Please refer to the below
for installation.