6th edition, 22.05.2023
7000.05060, 6th edition, 22.05.2023
7000.05060
Safety
11
2.4
EC directives on product safety
The following EC directives on product safety must be observed.
If the Motion Controller is being used outside the EU, international, national and
regional directives must be also observed.
Machinery Directive (2006/42/EC)
The controllers with attached motor described in this technical manual may be drive sys
-
tems according to the Machinery Directive. They are therefore to be considered incomplete
machines according to the Machinery Directive. Compliance is documented by the Declara
-
tion of Incorporation for the product and by the EC Declaration of the Conformity.
EMC Directive (2014/30/EU)
The directive concerning electromagnetic compatibility (EMC) applies to all electrical and
electronic devices, installations and systems sold to an end user. In addition, CE marking can
be undertaken for built-in components according to the EMC Directive. Conformity with
the directive is documented in the Declaration of Conformity.
Applied standards
Various harmonized standards were applied to the products described in this technical
manual; these standards are documented in the EC Declaration of Conformity. You can find
the Declaration of Incorporation for the product and the EC Declaration of Conformity in
chap. 8, p. 63.
WEEE Directive (2012/19/EU)
The directive on the disposal of electrical and electronic devices prescribes the separate col
-
lection of old electrical and electronic devices. The products described in this technical man
-
ual fall within the scope of this directive.