KIC551
K I C 5 5 1 U s e r M a n u a l
61
© 2 0 2 1 F a s t w e l V e r . 0 0 3
1. Test reading of the EEPROM register contents of multiplexer. 4 most significant bits of this
register always restore 0
хE.
2. Switching the microcontroller to the main configuration EEPROM FPGA. In this case, the
illumination color of the HL13 LED will become green.
3. Loading
the Program Configuration Unit “fpga_mn.bin” to the main configuration EEPROM
FPGA. The process can take several minutes.
4. Disconnecting the microcontroller from the main configuration EEPROM FPGA.
In order for the changes to take effect (for the newly written configuration to become active), you
should perform the power supply on/off switching cycle of the KIC551/KIC551RC module or use
the program initialization of FPGA by means of the microcontroller (where the peripheral devices
connected to the KIC551/KIC551RC module will also be initialized).
For booting the Program Configuration Unit “fpga_rs.bin” of the reserved EEPROM FPGA, the
sequence of actions will be as follows:
