Fastwel CPC1302 User Manual Download Page 41 | Manualshive

Page: 41 / 53

Fastwel CPC1302 User Manual Download Page 41

CPC1302 User Manual

0-41

Transportation, unpacking and storage

CPC1302

4

AMI® BIOS

Your module has an installed adapted version of AMI® BIOS, which is a standard system for

IBM PC AT-

compatible computers. It supports Intel®x86 and Intel®x86-compatible CPUs, ensures

low-level support for CPU, memory and I/O subsystems.

Using BIOS Setup program you can change BIOS parameters and control special computer

operation modes. It enables to change basic parameters of system configuration.

4.1

BIOS update

BIOS update is carried out using the Flash Programming Tool utility (is available on network

file-servers of the manufacturer and official distributor).

Actions for updating BIOS

There is a BIOS version for CPC1302 available on FTP:

1302_Vxxx.bin

.

Example of BIOS update via an integrated UEFI SHELL:

1. Copy EFI utility to USB drive root directory.

2. Copy with the new BIOS to the EFI catalog.

3. Connect USB drive to the CPC1302 module.

4. In BIOS SETUP select the menu "Save & Exit -> Launch EFI Shell from filesystem

device".

5. Type in the command line:

fs0:

cd efi64

fpt64.efi -f <file name>

6. Wait for update completion and message "FPT Operation Passed" to appear on the screen.

7. Restart the system

«
...
39
40
41
42
43
...
»

Summary of Contents for CPC1302






















































Reviews:

No comments