CPC1302 User Manual
0-37
Intended use of CPC1302
CPC1302
CPC1302-03 (-04) modules with heat-removal sets ACS30076-02 can be operated at
ambient temperatures of up to +75°C without reduction in performance. (*)
(*) It specifies operating modes under the load of processor cores and graphics engine with
synthetic benchmarks, ensuring maximum Thermal Design Power (TDP).
3.5
Installation of CPC1302
CPC1302
Module
can be installed on the carrier-board compatible with the COM
Express Type 6 r.2.1 standard.
3.5.1 Safety requirements
For proper installation of CPC1302 it is required to strictly follow the below rules and safety
requirements in order to avoid damages to the device and not to injure the health of people.
Manufacturer shall not be liable for any damages, arising out as a result of non-observance of such
requirements.
Warning!
Be careful when handling the module, since the heat-spreading plate
(and heatsink, if installed) can become too hot. Moreover, the module
should not be placed on any surface or put in any container until both
module and heatsink will have the room temperature.
Warning!
Switch off the power supply prior to installation of the module to the
carrier- board. Non-compliance with this rule could pose threat to your
health, as well as could lead to the failures of operation of the module
and the entire system.
