3-20
Setting the Threshold (Teach Function)
4
Press
MENU
OK
to set the teach mode and the
detection margin.
The OLED display returns to the RUN screen and
the received light amount appears.
5
With no object present, hold down
TEACH
ESC
for 1
second or more.
The output indicator of the channel (output 1 or
output 2) for which the teach function is being
executed blinks once in orange.
6
The threshold is set and its display blinks.
This completes the execution of the teach function.
The OLED display automatically returns to the
RUN screen.
* If the received light amount does not meet the
conditions required for the teach function, “Teach
error” will be displayed. If this error is displayed,
refer to
“5-1 Error Displays” (page 5-2) for
troubleshooting.
MEMO
Operations when executing the teach function again
After executing the teach function, to reset the teaching with the same mode again, simply hold down the
TEACH
ESC
key for
1 second or more. (The operations in steps 1 to 4 of the operation procedure are not necessary.)
In this situation, the teach function is executed with the previously set mode and detection margin.
1
2
MENU
OK
TEACH
ESC
Mode selected
1
2
MENU
OK
TEACH
ESC
1000
100
S
R
Output 1
indicator
Output 2
indicator
RUN screen
1
2
MENU
OK
TEACH
ESC
Refresh
1
2
MENU
OK
TEACH
ESC
923
1
2
MENU
OK
TEACH
ESC
To run mode
1000
923
Threshold
Summary of Contents for D4RF Series
