Fastora NA-1531, Hardware Installation Manual

Page: 28 / 66

NA-1531 / NA-1801 Networking Application Platform Hardware
Installation Guide
Starting the Appliance 28
a) Baud Rate = 9600
b) Data Bits = 8
c) Stop Bits = 2
d) Parity Check = None
In fact, the COM Port is only use two signal as Tx and & Rx
in data transaction
The LCD module model name was called AX89063. The
PC with AX89063 connection is should be PIN To PIN
assignment.
The LCD is “16 by 2”
，
it show 16 words in each row. And
can show totally 32 words with two rows.
2. Data transfer format
A) command
：
0D hex
：
PC
à
AX89063
It moves the cursor to the entry point (on left upper
corner of LCM)
。
Attention
：
It is just move the RAM flag to point out into the entry
point of LCM. It needs to be progress this commands
about 40
μ
s
。
If we need to clear the contents in show up, it needs
to be progress this commands about 1.6ms
。