Fastora NA-1531, Hardware Installation Manual

Page: 48 / 66

NA-1531 / NA-1801 Networking Application Platform Hardware
Installation Guide
Starting the Appliance 48
each device.
The choice: Auto, Mode 0, Mode 1, Mode 2, Mode 3, Mode
4.
IDE Primary/Secondary Master/Slave UDMA
Ultra DMA/33 implementation is possible only if your IDE
hard drive supports it and the operating environment
includes a DMA driver (Windows 98 or a third-party IDE
bus master driver). If your hard drive and your system
software both support Ultra DMA/33, select Auto to enable
BIOS support.
The Choice: Auto, Disabled.
On-Chip Primary/Secondary Serial ATA
The integrated peripheral controller contains an S -ATA
interface with support for two S-ATA channels. Select
Enabled to activate each channel separately.
The choice: Enabled, Disabled.
USB Controller
Select Enabled if your system contains a Universal Serial
Bus (USB) controller and you have USB peripherals.
The choice: Enabled, Disabled.
USB 2.0 Controller
Select Enabled if your system contains a Universal Serial
Bus V2.0 (USB2.0) control ler and you have USB2.0