Fastora NA-1531, Hardware Installation Manual

Page: 21 / 66

Table of Contents
21
u
Main Board
2. 2 . 2 Installing a Microprocessor (CPU)
1. Align pin one (e.g., white dot) of the CPU with pin one of
the socket. Pin one of the CPU socket may either be
marked on the board or indicated by an arrow head
symbol on one corner of the socket. Normally, its diagonal
corner distinguishes pin one on the socket.
2. To complete the CPU installation, gently press the CPU into
place.
3. Double-check the insertion and orientation of the CPU
before appl ying power. Improper installation will result in
permanent damage to the CPU.
2 . 2 . 3 Installing a memory module (DIMM)
The main board can supports two 184-pin DDR socket for a
maximum total memory up to 2GB None-ECC unbuffer Memory .
The Intel 875 can support Single- and Dual-Channel Operation
1. In single-channel operation DIMM2 is disabled. Only DIMM1 need
be added.
2. In dual-channel mode the memory populated in the two channels
must be identical DIMM configurations. The configuration consists
of the same number of physical rows or banks (1 or 2), row
address bits, column address bits, the same technology part
(128-Mb, 256-Mb, 512-Mb), and the same DRAM chip width (x4,
x8). It is not necessary to match DIMM timings. A CL=2.0 DIMM
can be paired with a CL=2.5 DIMM as long as the geometry
matches.
Attention:
u
When you handle electrostatic discharge-sensitive
(ESDs), take precautions to avoid damage from static
electricity.
v
The memory can support DDR266/DDR333/DDR400.