FASTERHOLT FM2500, User Manual And Spare Parts Catalogue

Page: 31 / 60

31
Connect the battery and set machine data #30
= 0 No GSM
= 1 Use GSM, all tele numbers can be used, no speed setting
= 2 Use GSM, only the numbers created in the SMS list can be used.
See chapter for setting up data.
After approx. 30-45 seconds, the modem should be connected to the GSM network.
Signal strength, 0–31 and the network is then displayed in menu #6.
Signal strength of 10 or above is a stable connection.
Signal strength of 99 indicates no signal.
- Missing antenna
- Very poor signal
Modem has two LED to indicate status.
Green LED
Ready ON
YELLOW LED
Sleeping OFF
Searching the network
– No SIM card in modem
Flashes quickly
– Incorrect PIN code
– No GSM network available
STANDBY
(Registered on network)
Flashes slowly
Connection (TALKING) On
When an SMS is received, the display shows:
Receiving an SMS, sender's phone number and 40 characters of message. All SMS
can be received, but only known commands are accepted.
When an SMS is sent, the display shows:
Sending an SMS, receiver's phone number and machine status.
For further information about GSM modems, please refer to the manufacturer’s manuals.
SPEED 11.1m/h
DOSE 22 mm
TIME 14:10 STOP 7:43
M.DATA 30 1
SIGNAL 23
NETWORK HOME
A: +45123456
B: +45234567
Receiver SMS
#: +45123456
Status
Sender SMS
#: +45123456
Status Running