FASTERHOLT FM2500, User Manual And Spare Parts Catalogue

Page: 15 / 60

15
Short instructions for use
Move machine to a new lane. Display shows start and stop time. Pull hose
out to end of the lane. (e.g. 250 m)
Display now shows stop after 9h 20m. Press the "+" or "-" key to set the
speed. Speed can be adjusted during irrigation.
SPEED has decreased, DOSE has increased and STOP time is later.
Press START to start. Press
PRE
and
POST
for pre- and post-irrigation
respectively. STOP time will be later when PRE and POST irrigation are
selected.
The turbine will start when the water pressure increases. After a short period,
the regulator finds the correct speed. Irrigation continues until STOP SENSOR
is activated at the end of the lane.
If pre-irrigation is selected, the turbine stops immediately after performing
a start and pre-irrigation. When the pre-irrigation time has elapsed, the
turbine starts and the machine changes status to Irrigating.
If post-irrigation is selected, the turbine stops at the end of the lane when
the stop sensor is activated. Post-irrigation then starts.
Stop sensor is activated, turbine and water are shut off. The machine is now
ready to be moved to a new lane.