12
Nelson SR 150
is factory-adjusted to Danish conditions and ready to use after the following three steps:
1.
Select and install the nozzle size that best suits your application. Performance data for the different sizes are shown in the table
below.
2.
Adjust the stop on the part circle to obtain the desired irrigation angle.
3.
There is a grease nipples which should be checked once a week for refilling.
ADJUSTMENT
The only thing you can adjust is the counterweight on the drive arm. By moving the counterweight forward, the gun
will slowly irrigate from side to side. If you move the counterweight back, the gun will irrigate quickly. If it does not
irrigate quickly enough, you can remove the brake springs (no. 778474) in pairs (contact the service department).
WARNING: DO NOT ADJUST WHEN THE GUN IS IRRIGATING!!
DANGER........: HIGH WATER PRESSURE – STAY CLEAR!!
TABLE FOR NELSON SR 150
Technical data
Summary of Contents for FM2500
