Fastech Ezi-Step II Plus-E, User Manual

Page: 21 / 68

www.fastech.co.kr
21
External Name and Function Setting of Ezi-STEPⅡ Plus-E
Drive Status LED ５－２．
Display Color Function On / Off Condition
PWR Green Power Input Indication Light on when power is applied.
RUN Yellow Driving Indication Lights on when the motor is running
SON Orange
Motor enable status
indication
Enable : Light On, Disable: Light Off
ALM Red Alarm indication
Flash repeat when protection function is activated.
( if count LED flash time, it is possible to check which
protection function is activating )
Ethernet IP Display ５－３．
1) It displays the setting ID of SW1,2 (Drive ID Selection Switch)
2) In case of ID setting after power input status, 7-Segments are flushing and changed ID is not
applied.

The IP must be changed when power off status.
3) When Alarm generating from drive, Alarm value is displayed on 7-Segment, not ID value.
Alarm value is displayed on 7-Segment as ‘E-000’ type with one each dial.
This dial is changing every one second. (ex. Display of Alarm No. 15)
4) It displays the all of set ID on the drive after power input, it displays end number of IP address
as hex code.
Ex) IP Address: 192.168.0.10
Firstly display 192.168.0.10

only display 0A