Fasep FZ63/3S, Use And Maintenance Manual

Page: 10 / 38

Page 10 Use and Maintenance Manual - Spare Parts
LOCATION
For correct installation, strictly follow the instructions outlined below:
1) Check the support surface is level.
2) The lift must be installed on a well-levelled floor, with electro-welded mesh
20x20, with a specific resistance of 35 daN/mm2 and a minimum thickness
of 150 mm.
ATTENTION! The lift transmits a maximum load of 2100 Kg for each
column on the floor.
3) The lift must only be installed in a closed location, protected from weather
and sufficiently high to move the vehicle on the lift at a maximum lifting
height.
4) The work environment must be well lit, with a minimum intensity of 50 Lux,
measured on the ground and on the command station.
5) Connection to the electricity mains must be carried out in compliance with
the specifications in the paragraph
“
ELECTRICAL CONNECTION
”.
6) Do not lubricate the arms of the lift.