Fasep FZ63/3S, Use And Maintenance Manual

Page: 7 / 38

Use and Maintenance Manual
– Spare Parts
Page 7
RESIDUAL RISKS AND INDIVIDUAL PROTECTION DEVICES
Even though the machine was manufactured in compliance with safety
standards in force, residual risks persist that cannot be eliminated due to the
functionality of the machine.
RISKS DUE TO SUSPENDED LOADS:
Identify the zone relevant to suspended loads indicated in this manual, using
horizontal sign. Install an appropriate forbidden transit under loads sign.
RISKS DUE TO MOVING BODIES:
Identify the zone relevant to the moving bodies using the appropriate sign.
RISKS DUE TO THE PRESENCE OF ELECTRICITY:
The electrical system meets all safety requirements outlined by the standard.
It is forbidden to access the powered parts and these parts are indicated.
It is compulsory to only allow specialist and authorised staff carry out repairs on
the parts of the system.
RISKS DUE TO THE PRESENCE OF MINERAL OIL:
See the relevant specifications in the
“
MAINTENANCE
” chapter.
RISKS DUE TO LACK OF INFORMATION AND TRAINING:
The necessary sign is in place.
This manual is supplied for assembly, adjustment, use and repair of the
machine, highlighting its consultation is compulsory before each operation.
It is strictly forbidden for unauthorised staff to use the machine.
RISKS DUE TO NOISE:
Subject to compliance in relation to noise in the final work environment, the
noise produced by the machine is such not to require any protection measures.
RISKS DUE TO FALLS:
It is strictly forbidden, with adequate warning, to access the lifting parts.