Fasep FZ63/3S, Use And Maintenance Manual

Page: 3 / 38

Use and Maintenance Manual
– Spare Parts
Page 3
Thank you for choosing a
Eurolift manufactured by Fasep . It is the result of
years of experience in the sector and careful design to eliminate or reduce to a
minimum any risk of accidents for the operator.
All the provisions of the
Machinery Directive and subsequent amendments
were complied with to design and manufacture the lift.
ATTENTION!
This manual is an integral part of the product.
Carefully read the warnings and instructions contained in this manual
since it provides important instructions on safety, use and maintenance.
Carefully store this manual for any further consultation.
ATTENTION!
It is strictly forbidden to overload the lift beyond the permitted limits.
Installation, assembly and operation must be carried out by qualified and
professionally trained staff.
This equipment should only be intended for the use for which it was
specifically designed.
The lift in question was designed for use to lift cars and light, four-wheel
commercial vehicles with a maximum weight of 3500 Kg.
Any other use is considered improper and therefore forbidden.
The manufacturer cannot be held in any way liable for damage caused by
not complying with these instructions.
Technical support:
Italy:
Contact the company.
Other countries: Contact the importer of the equipment