manualshive.com logo in svg

Faro FaroArm Quantum, User Manual, Page: 194 / 202

Share
Download
Faro FaroArm Quantum User Manual Download Page 194

D-4

 

•

Typically, these services include repair of the computer, memory 
cards, and video monitors.

Not Covered
•

All exclusions contained in the 3rd party service provider’s policy 
which is incorporated herein by reference.

•

Software operating system installation.

•

User intentional or unintentional removal of key software property 
or files.

Software Coverage

Covered
•

FARO’s warranty may differ depending on the Software you are 
utilizing. Please consult your software warranty or contact FARO 
customer service to determine the warranty conditions for your 
particular software.

Not Covered
•

End users are responsible for the procurement and installation of 
3rd party authored or software updates as required to use with 
FARO authored software products, unless FARO resold these 
packages to the end user as an authorized reseller. Examples of 3rd 
party authored software are: DOS, Windows, AutoCAD, AutoSurf, 
SurfCAM and others.

Extended Warranty with Loaner

The Extended Warranty with Loaner Plans additionally provide loaner 
equipment when service (and in some cases calibration) is required. All 
equipment shipping costs are paid for by FARO (both ways). FARO will 
make its best efforts to ship all loaner equipment within 24 hours of the 
receipt of the purchaser’s request. Once the need for a service has been 
verified by FARO, FARO will make its best effort to ship all loaner 
computers within 72 hours of the receipt of the purchaser’s request.

08m80e00_FaroArm_Quantum.book  Page 4  Tuesday, August 22, 2017  11:03 AM

Summary of Contents for FaroArm Quantum











































































































































































































Reviews:

No comments