Faro FaroArm Quantum, User Manual, Page: 130 / 202

FaroArm
®
Quantum
August 2017
120
Chapter 6: Maintenance and Troubleshooting
The Quantum is compensated at FARO’s production facility and should only
need to be recompensated after the unit has been subjected to a shock that
removes surface material or causes bending. Periodic calibration tests should be
completed to certify the Quantum accuracy and repeatability.
See “Quantum
Calibration” on page 115.
FARO recommends you return your Quantum to a service center, once a year, for
our annual calibration and a 15 point check up.
Host Computer
The computer is an electronic device containing many sensitive components. It
should be handled with care. Here are some steps you can take to prevent damage
to your system:
•
Never use the computer in harsh environments where it may be subjected to
rapid temperature change or excessive dust.
• Never expose the computer to excessive shock or vibration.
• Prevent overheating by keeping the computer's air vents clear of any
obstructions.
• Never place anything on top of the computer when it is recharging or
operating. This can cause the computer to overheat.
• Do not operate the computer from an AC outlet where voltage fluctuates
excessively. Use a power strip with a surge protector.
• Do not use an AC adapter other than the one supplied with the computer.
• Do not push on the LCD screen excessively or subject it to shocks.
• Do not expose the LCD screen to direct sunlight, even through a window.
• Do not hold the computer by the LCD panel.
• Do not try to force the LCD screen beyond its fully opened position.
CAUTION
: In the rare event that you should see or smell anything which
indicates overheating (smoke or a strange smell), turn off the power immediately
and contact your contact your Customer Service Representative by Phone, Fax or
E-Mail.
See “Technical Support” on page 161.
Mounting Stiffness Test
The Quantum is portable and can be mounted in a variety of environments. The
Quantum is counterbalanced, and it is the nature of counterbalancing that
restoring forces may exist in the mounting due to the applied forces generated by
08m80e00_FaroArm_Quantum.book Page 120 Tuesday, August 22, 2017 11:03 AM