FarmTek 112534 Manual Download

Page: 25 / 27

Revision date: 05.13.20 112534

INSTALLING THE 110010 TOMATO ROLLERHOOK

ASSEMBLY*

As plants mature, it may become necessary to provide adequate support. The 110010

Tomato RollerHook

Assembly used with the 110006 or 110007 tomato clips provide the

perfect support system, saving you time and money.

1. Hang the assembled RollerHook® from a wire, cable, or frame member above the Dutch

bucket system.

2. Pull cord from the spool so it reaches the desired Dutch bucket.
3. Take one 110006 or 110007 clip, wrap it around the stem of the plant, feed the cord into

the hinged part of the clip, and snap the clip closed to lock cord in place.

4. Move back to the cord spool and tighten to remove slack. To prevent plant damage, do

not overtighten. As the plant grows, add additional clips as needed for support.

OPTIONAL ACCESSORIES—ADDITIONAL PURCHASE REQUIRED

*Additional purchase required: Contact your sales representative to purchase Tomato

RollerHook

Assemblies for your Dutch bucket recovery system.

Summary of Contents for 112534




























Search results

Summary of Contents for 112534

Reviews:

Related manuals for 112534

Brands by name

Popular brands

FarmTek 112534, Manual

Search results

Summary of Contents for 112534

Reviews:

Related manuals for 112534

Brands by name

Popular brands