![background image](http://html.mh-extra.com/html/farmtek/112534/112534_manual_545402009.webp)
9
Revision date: 05.13.20 112534
2
Assembly Instructions—Dutch Bucket Preparation
ASSEMBLE AND INSTALL SIPHON ELBOWS
Siphon Elbow
2
1
3
4
6
Drain T
ube
Complete these steps:
1. Position the drain tubes on the floor of the growing area for your system. Use the
diagram below or on page 5 for proper spacing. Position the open end of tubes so
they empty into the drain.
2. Assemble the siphon elbows as shown. Two (2) elbows are used for each
assembly.
3. Take the elbow assembly and install one inside each Dutch bucket.
4. Using the diagram below or on page 5, set each Dutch bucket in place. Use 12
buckets for each row. Verify that each bucket drain nipple is inserted in the drain
hole of the pvc drain tube.
5. Continue with the next procedure.
TYPICAL DUTCH BUCKET LAYOUT
5
Insert drain nipple into
drain hole of pvc tube.