![background image](http://html.mh-extra.com/html/farmtek/112534/112534_manual_545402020.webp)
20
112534 Revision date: 05.13.20
ATTENTION:
SYSTEM SHOWN DIFFERS
FROM ACTUAL SYSTEM. FILTER ASSEMBLY
IS THE SAME. STEPS FOR CLEANING
RESERVOIR ARE THE SAME.
OPERATIONAL AND MAINTENANCE INFORMATION
Clean the reservoir periodically to maximize plant growth and to minimize system contamination. The steps that follow can be used to pump the reservoir for
cleaning and typical maintenance.
Cleaning the filter is strongly recommended after cleaning the reservoir.
RESERVOIR CLEANING AND MAINTENANCE
1. Turn off pump and connect a garden hose to
the shutoff valve on filter. Place end of hose in
a bucket or run it to the desired location.
2. Open the shutoff valve on the filter and turn the
pump on to pump out the reservoir. Turn off the
pump once the reservoir is empty.
3. Clean the reservoir as needed and repeat the
steps to pump it out again if needed. Close the
shutoff valve.
4. Remove the hose and clean the filter. See next
page for procedure.
5. Refill the reservoir with nutrient solution.
6. Turn on pump and check dripper stakes to
ensure they are working. Clean if needed.
112066
Shutoff
Valve