![background image](http://html.mh-extra.com/html/farmtek/112534/112534_manual_545402024.webp)
24
112534 Revision date: 05.13.20
OPTIONAL ACCESSORIES*
Depending on the plant and application, using
110010 Tomato RollerHook
®
Assemblies and the
110006 or 110007 clips can save time and labor.
The RollerHook
®
components are easily
assembled by slipping the spool between the wire
ends of the hanger. Position the spool so the lock
is next to the lowest part of the wire spring. See
the photos below.
After assembling each, consult the following
page to view installation photos using the 110010
assemblies and the 110006/110007 clips.
*Additional purchase required: Contact your sales
representative to purchase Tomato RollerHook
®
Assemblies for your Dutch bucket recovery
system.
OPTIONAL ACCESSORIES—ADDITIONAL PURCHASE REQUIRED
ATTENTION:
Photo to the right
shows the spool incorrectly
installed in the wire hanger.
When installed this way, the
spool lock slides under the
lock spring of the handle. As
a result, the cord will unravel
from the spool.
The installation
steps below show the correct
orientation.
Incorrect
Correct
3
2
5
1
4
Spool
Lock