Farmi BC3000, Operation, Maintenance And Spare Parts Manual

Page: 25 / 128

CH27 ACR/ACC PROFI
25
A
D
C
B
D
F
E
MOUNTING OF THE DISCHARGE PIPE
1. Mount the lower part of the discharge pipe
(A) using the mounting hardware (B). Al-
ways clamp the lower part with levers (C)
(fig. 1).
2. Lift the discharge pipe to the correct height
and insert the M20x260 pin (D).
3. Move the discharge pipe to the working
position and secure it using the wing nut
(E) (fig. 2).
4. The long discharge pipe (F) is assembled on
the floor before it is mounted at the cor-
rect position in the same way as the short
discharge pipe. Insert the M20x260 pin (D),
set the discharge pipe to the upper posi-
tion and secure it using the wing nut.
If the chipper is equipped with an optional dis-
charge pipe control device, the latter must be
mounted on the chipper before the discharge
pipe. First, the control device is mounted to
the chipper using the lock band and then the
discharge pipe is installed to the control device
as described above.
Fig. 1.