Farmi BC3000, Operation, Maintenance And Spare Parts Manual

Page: 61 / 128

CH27 ACR/ACC PROFI
61
ITEM ACTION
MAINTENANCE
INTERVAL
NOTES
Chipper frame and
knife units
Tighten pins and nuts Weekly All pins and nuts must be
tightened after the first opera-
ting hour! For the torques, see
the table.
Check twig breaker
and additional knife
At the time of
knife mainte-
nance
Check the twig breaker and
the additional knife for brea-
kage.
Hydraulic system Replacement of
the return filter
500 h
Oil change 1500 h First oil change after 80 opera-
ting hours!
Check belt 250 h If necessary, tighten accor-
ding to instructions.
Check hydraulic hoses
and joints
Daily
Grease nipple:
1. PTO drive shaft
Lubricate Daily See separate instructions
2. Rotor bearing Lubricate 50 h 5-6 pump strokes / bearing
3. Swing bearing of
the roller swing
Lubricate 50 h
4. Bearing of
the feeding device
Lubricate 50 h
5. Discharge pipe Lubrication 50 h
Electrical system Check lines and
connectors.
Weekly
Lubricate electrical
connectors
250 h Spray anti-oxidant onto the
connectors.
Feed unit Inspecting the feed
chain tension
50 h If necessary, tighten accor-
ding to instructions.
Check the sliding
plates for damage.
50 h
MAINTENANCE ITEMS