Farm King Allied Binary Series, Operator And Parts Manual

Page: 25 / 100

Assembly - Binary Series
23
Preparing For Assembly
IMPORTANT
Snowblowers are shipped without some
components installed due to transport
restrictions.
• Using the packing list, locate and count the
individual components and verify that you have
received the correct number of each component.
• Check all the components for damage. If any
components are damaged or missing, contact
your Farm King dealer.
WARNING
AVOID INJURY OR DEATH
Before moving the tractor, look in all directions
and make sure no bystanders, especially
small children are in the work area. Do not
allow anyone between the tractor and the
equipment when backing up to the equipment
for connecting.
Move the tractor, snowblower and components to
an area large enough for assembly.
WARNING
AVOID INJURY OR DEATH
Before you leave the operator’s position:
• Always park on a flat level surface.
• Place all controls in NEUTRAL.
• Engage the park brake.
• Stop the engine and remove the key.
• Wait for all moving parts to stop.
Park the tractor / equipment on a flat level surface.
Place all controls in neutral, engage the park brake,
stop the engine and wait for all moving parts to
stop. Leave the operator’s position.
WARNING
AVOID INJURY OR DEATH
Wear safety glasses to prevent eye injury when
any of the following conditions exist:
• When fluids are under pressure.
• Flying debris or loose material is present.
• Engine is running.
• Tools are being used.