Assembly - 1370, 1385, 1395, 13114 Backsaver Auger
10
Figure 25
Lower the hydraulic cylinder (Item 1) onto the
cradle rest (Item 2)
[Figure 25]
.
Rotate the cylinder 180° or until the hydraulic
fitting ports are facing down.
Figure 26
Install a strap (Item 1) around the upper lift arm
(Item 2). Connect the strap to an approved lifting
device
[Figure 26]
.
Raise and move the upper lift arm to the assembly
area.
Figure 27
Align and lower the upper lift arm (Item 1) until
the upper lift arm is inside the two mounts (Item
2) on the lower lift arms
[Figure 27]
.
Lower Lift Arm Pin Sizes:
• 1-1/2” x 7-1/8” - 1370 Models
• 2” x 9-1/16” - 1385 & 1395 Models
Narrow Rim Washer Sizes:
• 1-1/2” x 10 Ga. - 1370 Models
• 2” x 10 Ga. - 1385 & 1395 Models
Cotter Pin Sizes:
• 1/4” x 2” - 1370 Models
• 5/16” - 3” 1385 & 1395 Models
Install the two lift arm pins (Item 3) (from the
inside)
[Figure 27]
.
2
2
1
1
1
3
3
2
2
1
Summary of Contents for 1370
Page 1: ...062019 FK429 ASSEMBLY MANUAL BACKSAVER AUGER Models 1370 1385 1395 13114...
Page 2: ......
Page 92: ...Assembly 1370 1385 1395 13114 Backsaver Auger 90...
Page 93: ......