Fargo DTC4500 User Manual Download Page 97

Page: 97 / 140

2011

HID

Global

Corporation

All

rights

reserved

DTC4500

Card Printer/Encoder User Guide L001444 Rev1.1

Using the Error Message Table

This section provides the troubleshooting table for the error message. The DTC4500 has a display that will
show the Printer error messages.

•

When an error occurs in the Printer, the PC will show the error message on screen with solutions.

•

The display will blink in the location needing attention. Those locations include the Printer, Input

Hopper, Magnetic Encoder, Flipper, Card Path, Ribbon, and Data/Communication error device.

Each table uses a 3- column presentation to present a specific or Printer error message, its cause and its
solution.

•

This allows the troubleshooter to identify the error and its cause, and then perform the procedure

provided in the solution column.

•

This standard mode of identifying the problem and its solution should provide an efficient method of

troubleshooting this Printer.

•

If you encounter problems beyond the capabilities of these the error message table, you should contact

Technical Support. Refer to:

Section 11: HID Global Technical Support

Summary of Contents for DTC4500






























































































































Search results

Summary of Contents for DTC4500

Reviews:

Brands by name

Popular brands

Fargo DTC4500, User Manual

Search results

Summary of Contents for DTC4500

Reviews:

Brands by name

Popular brands