Fargo DTC4500 User Manual Download Page 112

Page: 112 / 140

2011

HID

Global

Corporation

All

rights

reserved

DTC4500

Card Printer/Encoder User Guide L001444 Rev1.1

112

Printer Specific Tools (DTC4500)

The status icons are as follows:

This icon indicates that the Print Ribbon supply is low and will need to be replaced soon.

This icon indicates that the Laminate in the Top Laminator is low and will need to be replaced

soon.

This icon indicates that the Laminate in the Bottom laminator is low and will need to be replaced

soon.

This icon indicates that the Printer needs to be cleaned. Refer to

Section 9: Cleaning

of the

User's Manual.

This icon is only displayed for Printers with an attached Dual-Input Hopper and indicates that the

Top Input Hopper is currently selected.

This icon is only displayed for Printers with an attached Dual-Input Hopper and indicates that the

Bottom Input Hopper is currently selected.

Summary of Contents for DTC4500






























































































































Search results

Summary of Contents for DTC4500

Reviews:

Brands by name

Popular brands

Fargo DTC4500, User Manual

Search results

Summary of Contents for DTC4500

Reviews:

Brands by name

Popular brands