Fargo DTC4500 User Manual Download Page 45

Page: 45 / 140

2011

HID

Global

Corporation

All

rights

reserved

DTC4500

Card Printer/Encoder User Guide L001444 Rev1.1

Selecting the Advanced Settings tab

Use the

Advanced

Settings

tab

for adjusting the internal Printer settings, which are customized for every

Printer at the factory and saved directly within the Printer's memory. (

Note:

You can select the Restore

Defaults to restore the internal default settings.)

Selecting the Advanced Settings tab

These change values for Firmware settings. See below.

•

Setting Column:

Displays label for setting

•

Default Column:

Displays default value for setting

•

Current Column:

Displays current value for setting

Change the value by clicking on the value to activate spin control or type.

•

Apply Button:

Applies changed values.

•

Restore Defaults Button:

Restores default values.

Summary of Contents for DTC4500






























































































































Search results

Summary of Contents for DTC4500

Reviews:

Brands by name

Popular brands

Fargo DTC4500, User Manual

Search results

Summary of Contents for DTC4500

Reviews:

Brands by name

Popular brands