184
(MT12 - Gb2004)
Si 312T/1
I
NTERCOMS *
VIDEO INTERCOMS *
TELECOMMUNICA
TION
coax
TWO-WAY VIDEO INTERCOM-TELEPHONE INTERCOMMUNICATING SYSTEM WITH PABX CONNECTED TO ONE EXTERNAL
DOOR STATION
Q.ty
Article
Description
4
ST 7100W
Studio series monitor
4
WB7100
Bracket for monitor
8
ST740W
Studio series telephone
8
WB700
Bracket for telephone
1
FT208P
PABX
1
ES60-ES65
Intercom-telephone interface for PABX
1
DV2
Video distributor
1
1281
Power supply
1
1382
Timer
1
PA **
Door release push-button (optional)
1
SE **
Electric door lock (12VAC-1A)
Door station series Mody
1
MD72
Module frames with back box
1
MD12
Module for electric door speaker
1
MD82
Hood cover
1
MD92*
Rain shelter with module frames
1
MD30
Electric door speaker (amplifier)
1
MD41
Camera
Door station series Matrix
1
MA42
Camera module with integrated audio amplifier
1
MA22
Button modules
1
MA62
Front frame
1
MA72
Back box and module frames
* Rain shelter is use instead of back box and hood cover.
** Articles not supplied by ACI Farfisa.
Notes
- If the maximum number of extensions is 5,
you can use the PABX FT105P.
- For the connection of name plate lamps read
notes 6, 7 and 8 of the installation instructions
on page 91.
- If the control switching ON is necessary, con-
nect terminal 4 of the timer (dashed wire).
- For wires dimensioning and video connec-
tion refer to the installation instructions and
table on pages 91÷93.
Programming
When using the PABX, the following program-
ming must be absolutely carried out:
- intercom interface activation
- activation to receive intercom calls
- how to assign incoming external lines
- how to assign outgoing external lines
See pages 167 and 168.
Application diagram
When using MD200 amplified external door stations, place this diagram on the diagram on page
185 and line it up with the riser.
Cut the resistance R8 on the
bracket of monitors VC1 and
leave it on the bracket of
monitors VC2.
WB7100