81
(MT12 - Gb2004)
I
NTERCOMS
*
V
IDEOINTERCOMS
*
T
ELECOMMUNICA
TION
M
O
D
Y
Place the push-button panel back box at a
height of about 1.65m (5' 5") from the floor
keeping the front edges flush-mounted and
vertical to the finished plaster.
Position the camera in such a way that
sunlight or other direct or reflected light
sources with high intensity do not hit the
camera lens.
PUSH-BUTTON PANELS
MD41.
B/W adjustable camera complete with:
- solid-state sensor (CCD), electronic autoiris,
3.6mm fixed optics and 6 infrared LEDs;
- front plate of anodized aluminium with break-
proof transparent screen;
- horizontal and vertical adjustment.
MD41C Color.
Colour adjustable camera complete with:
- solid-state sensor (CCD), autoiris and 4mm
fixed optics;
- front plate of anodized aluminium with break-
proof transparent screen;
- horizontal and vertical adjustment.
Terminals
V
Video signal output
M
Ground
F
Not connected
H
Power supply input
H
F
M
V
EXTERNAL DOOR STATIONS
CAMERAS
Technical data
MD41
MD41C
Power supply
21±3Vdc
21±3Vdc
Operating current
0.2A
0.4A
Video signal output
1Vpp on 75
Ω
1Vpp on 75
Ω
Video signal standard
CCIR
PAL
Minimum illumination
2 Lux
2.5 Lux
White balance
-
auto
Sensor
CCD 1/4" B/W
CCD 1/3" colour
Number of pixels
291,000
291,000
Horizontal frequency
15,625Hz
15,625Hz
Vertical frequency
50Hz
50Hz
Lens
3.6mm; F5
4mm; F4
Focus
0.1m ÷
∞
0.6m ÷
∞
Autoiris
electronic
electronic
Horizontal adjustment
± 15°
± 15°
Vertical adjustment
± 15°
± 15°
Operating temperature
-10°÷+40°C
-10°÷+40°C
Max. permissible humidity
80%RH
80%RH
Installation
For information on characteristics and assem-
bly of push-button panels, electric door speak-
ers, back boxes, rain shelters, hood covers and
modules see section “intercoms” on page 7 to
page 11.
Adjustments
If necessary, you can manually modify the cam-
era position by means of the horizontal and
vertical adjustments located on the back of the
camera.
To do this, you must:
- remove the upper screw of the push-button
panel to access the back of the camera;
- loosen the screw of the horizontal or vertical
adjustment (or both screws, if you want to
adjust the image in all the directions);
- move the camera in the desired direction;
- tighten the screw to block the camera in the
desired position;
- fix the push-button panel.
Horizontal (±15°)
Vertical (±15°)
Note
MD40 and MD40C cameras have the same specifications as models MD41 and MD41C,
except that they have not horizontal and vertical adjustments.
aaaaaaaaaa
5
'
5
"
"
16
/
1
4
"
8
/
7
52
124
90
2
"
16
/
9
"
4
/
3
19
3
