Farfisa PROJECT Series, Technical Manual

Page: 176 / 195

174
(MT12 - Gb2004)
Si 11MT/1
I
NTERCOMS
*
VIDEO INTERCOMS *
TELECOMMUNICA
TION
MIXED INTERCOM/TELEPHONE SYSTEM CONNECTED TO ONE EXTERNAL DOOR STATION
Q.ty Article Description
... PT510W * Project series intercom
... ST740W Studio series telephone
... WB700 Bracket for telephone
... FT11D Intercom-telephone interface
... FT105P-FT208P PABX
... ES60-ES65 Intercom-telephone interface for PABX
1 PRS220 Power supply
1 PA ** Door release push-button (optional)
1 SE ** Electric door lock (12VAC-1A)
Door station series Mody (for right item set see on pages 12÷15)
1 row 2 row
1 MD71÷74 MD71÷74 Module frames with back box
1 MD10-11-12 MD10-122-124 Modules for electric door speaker
... MD21 ÷ 24 MD222 ÷ 228 Button modules
... MD20 - 50 MD20 - 50 Blank and info modules
1 MD82 ÷ 812 MD82 ÷ 812 Hood covers
1 MD92 ÷ 912* MD92 ÷ 912* Rain shelters with module frames
1 MD30 MD30 Electric door speaker (amplifier)
Door station series Matrix (for right item set see on pages 20 and 21)
... MA71÷73 Module frames with back box
1 MA10P-11P-12P Modules with integrated audio amplifier
... MA20-22-24 Blank and button modules
... MA61÷63 Front frames
... Refers to number of users.
* Besides the mentioned model all the intercoms from the Project,
PuntoVirgola, 900 and 700 can be installed.
** Articles not supplied by ACI Farfisa.
(
2 ) Rain shelters are used instead of back boxes and hood covers.
Working instructions. See pages 27, 162 and 168.
Notes
- If the maximum number of extensions is 5, you can use the PABX
FT105P.
- For the connection of name-plate lamps, read notes 6, 7 and 8 of
the installation instructions on page 26.
- For wires dimensioning refer to the installation recommenda-
tions and table on page 26.
Programming
When using the telephone interface FT11D with the telephone ST740 it is
necessary to programme the buttons dedicated to the intercom functions (see
page 162).
When using the PABX, the following programming must be absolutely
carried out:
- intercom interface activation
- activation to receive intercom calls
See page 168.
If the PABX is only used for the intercommunicating service, without
connection to the public telephone lines (URB1 and URB2), it is necessary to
deactivate the incoming and outgoing external lines with the following pro-
gramming:
- how to assign incoming external lines
- how to assign outgoing external lines
See page 167.
Application diagram notes
When using the MD100, MD200, RP100, RP200 and UP
amplified external door stations, it is advisable to place this
diagram on the diagram of page 175 and line it up to the riser.
For the RP and UP series you can realise one- or two-way
systems; for the Mody series multi-family systems can be
obtained by adding the necessary quantity of push-button
modules.
Warning.
- In the external door stations RP100 and RP200 cut the
jumper W1.
- In the external door stations UP do not connect the yellow
wire and insulate it.
- For AC power supply wires
refer to the instructions
on page 26.