Farfisa PROJECT Series, Technical Manual

Page: 184 / 195

182
(MT12 - Gb2004)
Si 32MT/1
I
NTERCOMS *
VIDEO INTERCOMS *
TELECOMMUNICA
TION
VIDEO INTERCOM-TELEPHONE SYSTEM CONNECTED TO TWO EXTERNAL DOOR STATIONS
Q.ty Article Description
... ST 7100W + WB7100 Studio series m wall bracket
... WB700 Studio series tel wall bracket
... FT11D Intercom-telephone interface
... FT105P-FT208P PABX
... ES60-ES65 Intercom-telephone interface for PABX
... DV2D-4D Video distributor
1 1281 Power supply
1 1382 Timer
1 1273TV Exchanger
2 PA ** Door release push-button (optional)
2 SE ** Electric door lock (12VAC-1A)
Door station series Mody (for the composition see pages 82÷85)
1 row 2 row
2 MD41D MD41D Camera
... MD72÷74 MD72÷74 Module frames with back box
2 MD10-11-12 MD10-122-124 Modules for electric door speaker
... MD21 ÷ 24 MD222 ÷ 228 Button modules
... MD20 - 50 MD20 - 50 Blank and info modules
2 MD82 ÷ 812 MD82 ÷ 812 Hood covers
2 MD92 ÷ 912* MD92 ÷ 912* Rain shelters with module frames
2 MD30 MD30 Electric door speaker (amplifier)
Matrix series (for the composition see pages 88÷89)
2 MA42-43 Camera modules with integrated audio amplifier
2 CV01 Video signal converter
... MA20-22-24 Blank and button modules
... MA61-62-63 Front frames
... MA71-72-73 Back boxes and module frames
... Refers to number of users.
* Rain shelters are used instead of back boxes and hood covers.
** Articles not supplied by ACI Farfisa.
Working instructions. See pages 94, 162 and 168.
Notes
- If the maximum number of extensions is 5, you can use the PABX
FT105P.
- For the video connection with twisted pair, use the camera MD41D or
add the video converter CV01 (see page 172).
- For wires dimensioning refer to the installation instructions and table
on page 91.
- For the connection of name plate lamps read notes 6, 7 and 8 of the
installation instructions on page 91.
- If the control switching ON is necessary, connect terminal 4 of the timer
(dashed wire).
- For other types of push-button panels see the general catalogue.
Programming
When using the telephone interface FT11D with the telephone ST740
it is necessary to programme the buttons dedicated to the intercom
functions (see page 162).
When using the PABX, the following programming must be absolutely
carried out:
- intercom interface activation
- activation to receive intercom calls
See page 168.
If the PABX is only used for the intercommunicating service,
without connection to the public telephone lines (URB1 and URB2), it is
necessary to deactivate the incoming and outgoing external lines with
the following programming:
- how to assign incoming external lines
- how to assign outgoing external lines
See page 167.
twisted
pair
WB7100
On bracket WB7100 you must
move jumper J2 from position
1-2 to 2-3.