FAR TI60 INF 444, Instruction Manual

Page: 103 / 110

ENGLISH
GB-45
laws if in doubt regarding installation.
• You use heat-resistant and easy-to-clean
finishes (such as ceramic tiles) for the wall
surfaces surrounding the hob.
After installing the hob, make sure that
• The power supply cable is not accessible
through cupboard doors or drawers.
• There is adequate flow of fresh air from outside
the cabinetry to the base of the hob.
• If the hob is installed above a drawer or
cupboard space, a thermal protection barrier is
installed below the base of the hob.
• The isolating switch is easily accessible by the
customer.
Before locating the fixing brackets
The unit should be placed on a stable, smooth
surface (use the packaging). Do not apply force
onto the controls protruding from the hob.
Adjusting the bracket position
Fix the hob on the work surface by screw 2
brackets on the bottom of hob(see picture) after
installation.
Adjust the bracket position to suit for different
table top thickness.