07
7-7
Ed. 1 - 11/2017
Cleaning and Maintenance
- Push the lever towards the hub to “hook it” to
the ring groove.
- Turn the eccentric lever until hooking the pin
(by hand).
- Raise the lever and push it until comes to rest
against the fork.
- Check that the wheel has been mounted se-
curely and correctly.
If the quick release lever has not
been closed properly, the wheel
may shift or come loose. This may
result in hazardous riding condi-
tions, falls and accidents.
5.d - Removing the rear wheel
- Using the gear change lever, transfer the chain
to the smallest sprocket (see paragraph “2” -
Section “05”).
-
Position the bicycle so that it is stable and
the rear wheel is off the ground.
